Consultation hotline:
0769-85834598

欢迎进入东莞市宝轮精密检测仪器有限公司！

Online Service
客服
Working Time

Mon. To Sat. 8:30-17:30

Contact Information

赵 小 姐：18924354626

聂 先 生：13829285115　

PRODUCTS

CONTACT US

Add : No.15,Dongbao West Road,Houjie Town,Dongguan City,Guangdong Province,China
Tel : 0769-85834598 0769-85891915 0769-85891615
Fax :  0769-85833096

PRODUCTS

LABORATORY SINGE-SCREW EXTRUDER 3

  • LABORATORY SINGE-SCREW EXTRUDER 3
LABORATORY SINGE-SCREW EXTRUDER 3
编号: BL-6176-B
简述: This machine fits for the milling and processing of high molecular polymers such as engineering plas
关联产品: BL-6176-A
  • Product introduction
  • Product pictures

 Screw diameter20、25、30
 Screw revolution0-80rpm speed adjusted by frequency converting
 Ratio of length to diameter1:25，freely choosing other ratio of length to diameter 
(10-30 times)
  Material texture of screw 38CrMoAIA chrome-molybdenum alloy special tool steel，quenched and tempered, nitride, chrome-plated, processed through polishing and ultra precision honing，hardness: HRC55~60, roughness: Ra<0.4um，the depth of nitride level>0.6mm
 Material texture of material  
 barrel		38CrMoAIA chrome-molybdenum alloy special tool steel，quenched and tempered, nitride, chrome-plated, processed through polishing and ultra precision honing，hardness: HRC55~60, roughness: Ra<0.4um，the depth of nitride level>0.6mm
 Heating areaarea 4 of material barrel: mica heater, area 1 of machine head: heater，with the copper radiator on each area，covered by the stainless steel wind cover
 Cooling devicestatically forced air cooling by 4 pairs of multi-wing fans
 Deceleration devicehardened reducer, speed deceleration ratio 18:1, fine-grinding surface，fairly big load moment，fairly small noise during operating
 Melt pressure0-35Mpa, precision monitor the pressure fluctuation and flow change, namely, the pressure difference between before-filtering and after-filtering
 Filter cover(5-40) micron pore size，qualified with relative standards
 Drive power2.2~3.7KW
 Power3∮.AC380V.50Hz three phase five wire


Previous
Next