Consultation hotline:
0769-85834598

欢迎进入东莞市宝轮精密检测仪器有限公司!

Online Service
Working Time

Mon. To Sat. 8:30-17:30

Contact Information

赵 小 姐:18924354626

聂 先 生:13829285115 

PRODUCTS

CONTACT US

Add : No.15,Dongbao West Road,Houjie Town,Dongguan City,Guangdong Province,China
Tel : 0769-85834598 0769-85891915 0769-85891615
Fax :  0769-85833096

PRODUCTS

SHARP POINT TESTER 8

  • SHARP POINT TESTER 8
SHARP POINT TESTER 8
编号: BL-037
简述: Use to detection the position of the toy to be possible touch whether exist hurt security shape poin
  • Product introduction
  • Product pictures

Tester correction procedure
■   Clockwise rotation loosen locking ring.
■   clockwise turn test hat, and make the red indicating lamp to shine.
■   anti-clockwise slowly turn test hat, until the indicating lamp put out.
■   Move front or back turn the test hat makes sure the indicating lamps just shine the accurate position.
■   Comparison the marked scale line of locking ring, align at the scale line of test hat. 
■   Anti-clockwise turn test hat 5 grid scale line (on hat the distance of between the two short line is one grid).
■   screw the locking ring, until close to tail hood.

Test procedure
Put the peak in the shape point test tank, grip the test and forcing the strength4.5N, examine the indicating lamp whether shining. If make the shape point tester vertical,  not forcing strength, then this tested object strength should be 4.5N(1LBS)。

Determination: if lamp is bright, then the object is off-test product, may think has shape point exist.
Conform to the standard:ASTM F963 4.8, EN71-1998 8.12, GB6675-2003 A.5.9, 16 CFR 1500.48。
Fitting: weight, the light bulb 2, a pair of battery.

Previous
Next